MacTCP/IP Setup (classic networking for macintosh)
To set up the MacTCP/IP control panel, go to your apple menu and choose control panel.
Double click on the MacTCP/IP control panel.
Select PPP so that it is darkened then click on the more button
Change the method of obtaining the IP address to manually
Go down and enter the gateway number 216.198.28.1
Go back up and change the method of obtaining the IP address to Server
Go down to the Domain Name server section and make two entries
the first should be domain compuvision.net and ip 216.198.29.2
the second should be domain compuvision.net and ip 216.198.0.2
The first entry should be marked as the default entry
Click OK and
Close the MacTCP/IP window
Restart your macintosh.
FreePPP, ConfigPPP, and MacPPP setup
On a macintosh the PPP control panel is what is used to dial your modem to connect to the internet. It may be called FreePPP, ConfigPPP, or MacPPP.They are all similar and are only different versions of the same product.
To set up the control panel click on your apple menu and choose Control panels
Find whichever PPP control panel you may have on your system and double-click on it.
Click on the Config... button
The ppp server name should be compuvision.net
The phone number should be 893-8100 with or without the dash. For a complete list of phone numbers click here
you do not need to use the connect script
Click on the authentication button
put in your username and password in all lower case letters
Click OK
Click OK
Click Done
Close the PPP control panel
Restart your Macintosh!